before editing 900i and 1000i to work on 120hz capped sony crt

pixel3a/old/localhotspot10

@@ -0,0 +1,85 @@
+#!/bin/sh
+
+IFACE="wlan1"
+SSID="vegetablack"
+PSK="supermarioinreallife"
+CHANNEL="11"
+AP_IP="192.168.43.1"
+
+[ "$(id -u)" -ne 0 ] && exit 1
+
+echo "[*] Hard reset of Wi-Fi stack..."
+
+# Full path to Android's svc
+/system/bin/svc wifi disable 2>/dev/null
+killall hostapd dnsmasq wpa_supplicant wificond 2>/dev/null
+sleep 1
+pkill -9 hostapd
+sleep 3
+
+# Delete the interface
+iw dev $IFACE del 2>/dev/null
+sleep 1
+
+# Create a fresh AP interface
+iw phy phy0 interface add $IFACE type __ap 2>/dev/null || \
+iw phy phy0 interface add $IFACE type ap 2>/dev/null
+
+sleep 1
+
+ip link set $IFACE down 2>/dev/null
+ip addr flush dev $IFACE 2>/dev/null
+ip link set $IFACE up
+sleep 1
+
+# Simple hostapd config
+cat > /tmp/hostapd.conf <<EOF
+interface=$IFACE
+driver=nl80211
+ssid=$SSID
+hw_mode=g
+channel=$CHANNEL
+auth_algs=1
+ignore_broadcast_ssid=0
+EOF
+
+echo "[*] Starting hostapd (running in foreground)..."
+echo "Look for the line: AP-ENABLED"
+echo "Press Ctrl+C to stop later"
+echo
+
+hostapd /tmp/hostapd.conf
+
+# Assign static IP to the AP interface
+ip addr add "$AP_IP/24" dev "$IFACE"
+ip link set "$IFACE" up
+
+# Start dnsmasq (DHCP only – no DNS forwarding / no internet)
+dnsmasq \
+    --interface="$IFACE" \
+    --bind-interfaces \
+    --dhcp-range="$DHCP_RANGE" \
+    --dhcp-option=3,"$AP_IP" \
+    --dhcp-option=6,"$AP_IP" \
+    --port=0 \
+    --no-resolv \
+    --pid-file=/tmp/dnsmasq-"$IFACE".pid \
+    --log-facility=/tmp/dnsmasq-"$IFACE".log &
+
+sleep 1
+
+# Show status
+echo
+echo "Local-only hotspot started"
+echo "  Interface : $IFACE"
+echo "  SSID      : $SSID"
+echo "  Password  : $PSK"
+echo "  Gateway   : $AP_IP"
+echo
+iw dev "$IFACE" info 2>/dev/null | head -n 15
+echo
+ip addr show "$IFACE"
+echo
+echo "Clients will receive IPs in the range 192.168.43.10 – 192.168.43.50"
+echo "No internet is shared (local network only)."
+